Rhinoceros

Rhinoceros is a Modeling Application. Rhinoceros supports NURBS and polygon mesh modeling. It is widely recognized for its strengths in organic modeling. Take advantage of the variety of surface and solid deformation commands, as well as the very useful commands for creating surfaces through curves.

Set the Grid

Rhino's grid can be set to any unit of measurement. To match Unreal Units, set all grid options to powers of 2 just like Unreal. For example:

• Grid Extents (maximum viewable grid) = 1024;
• Major Grid Lines = 32
• Minor Grid Lines = 8

To make Rhino modeling easier for Unreal, set the grid options and then save the file as a template.

Modeling

Model entirely in NURBS, then convert to polygon mesh.

• Use Mesh From NURBS Object on the toolbar. The polygon conversion bar is used to detemine the mesh density.
• ReduceMesh (Tools → Polygon Mesh → ReduceMesh). Make certain your polycount is in base 8.
• Each face on a mesh has a direction that either points outward or inward. They can also be 2-sided. Make sure the mesh face direction is pointing outward by using the analyze → direction (command name = "dir") to view and change its direction.

Importing into UnrealEd

These are the sequential steps for converting Rhino models to any types of polygon brush, mesh or static mesh. Static meshes are for UT2003 or later.

BSP

1. File → Export Selected as an AutoCAD DXF
2. Import into Ued Brush → Import.

Mesh

1. File → Export Selected as an AutoCAD DXF
2. Import into Ued Brush → Import.
3. Add brush. Texture.
4. Brush → Polygons → To brush
5. Brush → Export
6. Use MeshMaker to convert your BSP brush to a mesh.

Static Mesh

1. File → Export Selected as an AutoCAD DXF
2. Import to MilkShape using File → Import → AutoCAD DXF
3. Export using File → Export → LightWave LWO, making sure to use the bottom-most LWO option. In UnrealEd 3's static mesh browser use File → Import.
4. Fill in your Package\Group\Name. myLevel is recommended for your package.

Discussion

Foxpaw: I had a couple of questions about using Rhino to make static meshes:

• Above it says you should use reducemesh to make sure your polycount is in base 8 - does that mean to ensure that it's a multiple of 8? (I assume that it does)
• When I import my meshes into UEd, the faces are always inverted. Is there a way to set Rhino to invert the faces when I save to DXF so that they'll be the right way around when I import to UEd?
• Whats a good grid scale to use with Rhino? IE, if I want the grid points in Rhino to be nice, round numbers of UUs?
• Is there any way (plug-in or otherwise) for me to get a little more control over textures? The only texturing ability I can find is setting a texture, no ability to UV map or anything like that.

Sobiwan:

• The help file for v3 says nothing about base8, so I suspect it was from an earlier version. I tried ReduceMesh and found there was no difference from using it compared to converting from nurbs to mesh (command = mesh). I kept the text so someone could verify my findings.
• Use analyze → direction (command = dir) to change the face normal direction.
• Grid scale is custom. See grid text above.
• v3 automatically does UV mapping from NURBS to polygon meshes. I dont recall if it was available in v1, but it was in v2 since the v3 whatsnew file doesnt list UV mapping.

GRAF1K: The reason your faces are inverted is a result of not keeping your polycount in base 8. A polycount of 513 rather than 512 will most likely wreak all face-normal havoc upon your mesh.

Foxpaw: What exactly does that mean? I know what Base 8 is, but any number can be represented in Base 8, so I'm a bit unclear. Do you mean that the polycount has to be a multiple of 8? That is has to be an integrally exponentiated from 8? As for the automatic UV mapping.. that's the problem. Rhino decides how and where to line up the textures, and I disagree with it's assessment of which parts of the skin belong where. Is there anyway to override that?

GRAF1K: 8, 16, 32, etc. usually work best. However, 384-type numbers (because 256 + 128 = 384) works most of the time as well. A little experimentation is due. As for UV-mapping, I'm lost myself. I usually use Milkshape's Window → Texture Coordinate Editor. Not very satisfactory though.